A1000

A1000

€1,490.00Price
The Infinite A1000 power amplifier is a Class D model using a DSP capable of handling large amounts of data simultaneously. The Infinite A1000 is designed to power one or more Infinite S12 subwoofers.

  • DESCRIPTION

    Designed for home cinema and all passive subwoofers, the Infinite A1000 amp can deliver up to 1000 watts under 4 ohms. This mono class D amp is equipped with several types of inputs: RCA, XLR and high level terminals, in order to operate in all possible home cinema or hi-fi configurations.

    The Infinite A1000 power amp has a low-pass filter adjustable from 40 to 200 Hz. The user can even choose from several attenuation slopes, from -12 to -48 dB per octave, in 6 dB increments. In addition, seven EQ settings are predefined to tailor the sound to the user's taste. In addition, a 9-frequency equalizer from 20 Hz to 125 Hz is available with an amplitude of -6 to +3 dB. The electrical phase is adjustable from 0 to 315° in 45° increments. Finally, the subsonic high-pass filter can be set to 20 or 40 Hz to limit the excursion of the diaphragm of the associated subwoofer(s).

    The Infinite A1000 power amp also features an LFE mode, in which only the subsonic filter operates. This mode allows the high cutoff frequency to be controlled by a home theater amplifier.

    The Infinite A1000 power amp is very complete and offers an impressive level of performance.

  • SPECIFICATIONS

    Rated output power : 1000W RMS <1% THD (4 Ohms)

    THD at 1000W (4 Ohms) : 0,07%

    THD at 1W (4 Ohms) : 0,08%

    Frequency response : SUB mode : 10-204 Hz (adjustable subsonic and crossover)

    LFE mode : 10Hz - 2 kHz

    (adjustable)

    S/N ratio : 100dB SUB / 90dB LFE

    Output noise : 1,5mV SUB / 2mV LFE

    Input sensitivity (for 1000W out) : RCA in : 220mV

    XLR in : 220mV

    High-level input : 2,6V

    Line output : 200mV (gain of about 0dB)

    Auto-on sensitivity : 3,2mV

    Automatic shutdown time : adjustable from 5 to 30 minutes, 5

    minutes increments

    12V trigger : 6V DC at 2mA minimum required to

    trigger

    Standby power : <0,5W

    Volume : Adjustable, -60dB to +10dB

    Subsonic filter : Adjustable, 24dB per octave, 20.3 to 40.5 Hz

    Crossover frequency : Adjustable, 39.4 to 204 Hz

    Crossover slope : Adjustable, 12dB-48dB per octave,

    6dB increments

    User EQ : 9 independent third frequencies (19.7 Hz - 125 Hz) wit h a -6dB/+3dB range

    DSP presets : 7 EQ presets set in factory (depends on the application)

    Phase : Adjustable from 0 to 315°, 45° increments

    Mode : SUB (crossover) or LFE

    Display mode : Enabled or disabled after 30 minutes of inactivity

    Dimensions (w/o feet & brackets) : W425,5 x H89 x D368,5 mm

    Dimensions (w/ feet & brackets) : W483 x H101,5 x D368,5