Legacy II 3220
Sold as a pair. The Legacy II 3220 is a 2.5-way, 3-driver floorstanding speaker with a down-firing bass-reflex design. It combines two 165mm aluminum-ceramic cone woofers and an AMT tweeter in a high-density MDF cabinet with four internal bracings. It delivers 150W RMS , has a sensitivity of 89dB , and a frequency response of 35Hz to 30kHz . Available in a piano lacquer finish, Dark Walnut lacquer, Light Walnut lacquer, or Black lacquer.
The Legacy II 3220 evolves the Legacy range with a modernized design, while retaining the acoustic performance of the Legacy. This 2.5-way, 3-driver floorstanding speaker combines two mid-bass drivers and an AMT tweeter, for a power output of 150 W RMS .
The two 165 mm (6.5") mid-bass drivers use a ceramic-coated aluminum diaphragm and vented voice coils. The AMT tweeter , with a radiating surface of 3680 mm², extends the frequency response up to 30 kHz (38 kHz at -5 dB).
The crossover is spread across two separate printed circuit boards, with cutoff frequencies at 200 Hz and 2800 Hz . The tweeter's 18 dB/octave high-pass filter incorporates impedance compensation. The upper mid-bass driver is filtered at 12 dB/octave with a parallel anti-resonant circuit, while the lower mid-bass driver is filtered at 6 dB/octave. The crossover uses 400 V MKP capacitors, metal oxide resistors, and low series resistance (DCR) inductors.
The column is constructed from 25mm high-density MDF , inclined at 3.5°. Four internal braces provide rigidity, two of which are tensioned with the magnetic assembly of the mid-bass drivers. The down-firing bass-reflex enclosure, tuned to 35 Hz, vents downwards. The base rests on three points, with height-adjustable spikes from 0 to 8 mm. The piano lacquer finish comprises 14 to 15 layers on average, for a thickness of 1.2 to 1.5 mm. Three finishes are available: Dark Walnut Lacquer , Light Walnut , and Black Lacquer .
